Products
-
Battery holder
This lets you use JeeNodes with batteries. Any 3- or 4-cell unit will do, actually. Depending on whether – and how well – sleep mode is implemented in the code running on the JeeNode, the...€3.00 - €3.50
-
Bridge Board
The Bridge Board v2 is an add-on which makes it very convenient to use a JeeNode (or a JeeNode USB, or a SMD Kit) alongside a solder-less breadboard, by bringing all pins out to the...€4.00 - €7.50
-
Carrier Board
The Carrier Board is a re-wiring option which sits between a JeeNode and its plugs. It has exactly the right size to fit snugly in a compact ABS box, made of two identical plastic shells...€4.50 - €12.00
-
Carrier Card
The Carrier Card is an add-on for use with the Carrier Board, via which it connects to up to 19 I/O pins on a JeeNode or SMD Kit. The entire inner area is perforated with...€3.50 - €14.00
-
Extension cables
These 6-wire extension cables were custom-made to make it easier to hook up plugs to ports (and to each other). The color codes were chosen to match the port header pinouts: PWR = RED DIO...€6.00
-
Flash Board
The Flash Board is a small board which sits on top of a JeeNode or SMD Kit, and which turns it into an ISP programmer for ATmega and ATtiny chips. The board includes an 128...€3.50 - €24.00
-
JeeNode Experimenter's Pack
The JeeNode Experimenter's Pack has everything you need to start experimenting with a JeeNode. It's essentially an Arduino plus wireless, ready to use with a large breadboard and wire jumpers. Oh, and it will run off...€63.50
-
JeePlug Pack
The JeePlug is a tiny board which can be used for prototyping and to “re-wire” connections between various headers and cables. There are 8 × 10 plated-through holes and pads, all the pads on the...€7.50
-
Large breadboard
These large solder-less breadboards make it easy to try out things hooked up to a JeeNode, and to build up elaborate electrical circuits with many components and ICs, particularly in combination with Wire jumpers. The...€7.50
-
Mini breadboard
These white mini breadboards make it easy to try out things hooked up to a JeeNode, particularly in combination with Wire jumpers. The boards have a self-adhesive backing and 2x 17 rows of interconnected pins...€4.00
-
Plug Headers
The Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers. These headers are used everywhere by JeeNodes and Plugs, as well as for the FTDI and PWR/SER/I2C connectors....€6.00
-
Proto Board
The Proto Board is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector). The two “ends” of the board are slightly different to help identify the proper...€3.50
-
Stacking Headers
These stacking headers let you extend a board on top of existing headers, while allowing a next level to "stack" on top. Perfect for JeeNode ports (6-pin) and for the PSIX header (8-pin). They are...€6.00 - €6.50
-
Utility Plug
The Utility Plug is a small board to interface any of the ports on a JeeNode to an RJ-12 jack. The kit includes the following extra components, to handle a variety of simple interfacing and...€2.50 - €12.00
-
Wire jumpers
These jumper cables are great for quick prototyping, especially in combination with the Mini breadboard. The cables are flexible, with a convenient little grip and solid cores on both ends. A bundle contains 70..75 jumpers...€6.00
-
Wireless Starter Pack
This JeeLabs Wireless Starter Pack has everything you need to get started with your own 3-node Wireless Sensor Network. Two nodes are pre-assembled and pre-loaded with demo software so you can be up and running...€169.50