Skip to navigation.


Products

  • Blink Plug

    The Blink Plug is a small board with room for two LEDs and two push buttons. A simple software trick can be used to interface to both switches and LEDs using only two I/O pins....

    €2.50 - €4.50

  • Gravity Plug

    The Gravity Plug is a small board containing the BMA020 3-axis accelerometer sensor. The sensor has a high (10 bits) accuracy and an adjustable ±2/±4/±8g range (i.e. up to 64 LSB/g). It communicates directly over...

    €2.50 - €18.00

  • Heading Board

    The Heading Board is a small board containing the HDPM01 compass module by HopeRF. For some reason, there is also a barometer and a temperature sensor on this module - which you can ignore if...

    €2.50 - €17.00

  • Infrared Plug

    The Infrared Plug is a small board which can send and receive modulated infrared signals, as commonly used by many remote controls and appliances around the house. The board uses a CMOS 555-timer chip to...

    €2.50 - €12.50

  • LED Node

    The LED Node is essentially the combination of a JeeNode, MOSFET Plugs, and the Room Board - in a narrow 18 x 132 mm form factor, making it fit in-line with standard RGB LED strips....

    €4.50 - €45.00

  • Lux Plug

    The Lux Plug is a small board containing the TSL2561 light intensity sensor. This tiny sensor communicates directly over I2C. There is a “LuxPlug” class in the JeeLib library to interface with this sensor and...

    €2.50 - €11.00

  • Pressure Plug

    The Pressure Plug is a small board containing the BMP085 barometric pressure and temperature sensor. This tiny sensor communicates directly over I2C. Some processing is required to arrive at properly adjusted readings, this is available...

    €2.50 - €16.00

  • RFM12B Board

    The RFM12B Board is a compact breakout board for HopeRF's RFM12B radio module, as featured on all JeeNodes and JeeLinks. If you are looking for an affordable way to add wireless communication to your Arduino...

    €3.50 - €11.50

  • Room Board

    The Room Board is a small board with sensors for indoor monitoring of several environmental parameters: temperature – via either an SHT11 or a DS18B20 humidity – via that same SHT11 sensor motion – via...

    €2.50 - €39.00

  • Thermo Plug

    The Thermo Plug is a small board with room for one of three types of temperature sensors, and either a buzzer or a transistor driver for a relay, small motor, or light. The different temperature...

    €2.50 - €24.50