THE FEATURES OF THE SILENT BASE 601 FROM BE QUIET! Functional and ultra-quiet Midi-Tower with a modern design Tempered glass side panel for an unobstructed view of the interior Side-facing air inlets on the front with orange trim Includes 1 cm thick insulation matts on the front, roof and side panels Two pre-installed Pure Wings 2 140mm fans 3-Level fan control for up to three fans Radiators up to 360 Millimeter possible STYLISH, FUNCTIONAL & INCREDIBLY QUIET Visually the new Silent Base 601 has nothing to hide, the closed front side is sleek and attractive in matte black. This is offset by the addition of air inlets with orange trim, and the steel front panel can also be easily lifted off thanks to the brackets, meaning the air filters are conveniently accessible for cleaning. The rear of the front panel comes kitted out with 10 mm of thick insulating material. Behind the dust filters lie two pre-installed 140 mm fans from the low-noise Pure Wings series from be quiet! Furthermore, the interior of the case provides more than adequate space for three 3.5" drives or up to six 2.5" drives. Two 3.5" drives can be installed in the drive cage without the need for tools beneath the PSU shroud, with potential vibrations minimised thanks to the silicon anti-vibration rails. This helps to prevent any unwanted vibrations emerging from the drive cage and affecting the rest of the case. If you want to install a further HDD, a slot is available behind the front of the case. With additional separately available accessories up to seven 3,5" drives can be installed, or up to 14 2,5" drives. PLENTY OF SPACE FOR COOL HARDWARE The Midi-Tower accepts motherboards in form factors such as E-ATX, ATX, Micro-ATX and Mini-ITX. Those wishing to install a CPU cooler will be happy to hear that it is extremely convenient due to the cut out, although please bear in mind the maximum cooler height of 185 mm. The case has seven expansion slots for plenty of space for upgrades and graphics cards can be up to 449 mm long. This is reduced to 287 mm if drives are installed in the way. An optional riser cable can allow the graphics card to be installed vertically. Two fans are pre-installed in the Silent Base 601. 140 mm Pure Wings 2 fans rated for 1.000 RPM are installed in the front and back - and offer 3 levels of speed control! Additionally, two 140 mm or 120 mm fans can be installed in the roof, a 140 mm- or 120 mm fan can be installed on the PSU shroud and a further 140 mm or two 120 mm fans can be installed in the front. Those who opt for water cooling can install a 280- or 360 mm radiator. The roof offers space for a 360 mm radiator, although this can’t be thicker than 3.4 cm including fans. Due to the sleds that can be opened from the side, fans and radiators are a breeze to install. Due to the clever combination of smart airflow and noise-dampening materials on the front and sides, the Silent Base 601 is a superb case that is ideal for high-end gaming and gamers who desire the quietest system possible. The innovative construction of the side panels, the top of the case as well as the bottom of the case combine to ensure perfect airflow at all times with a minimum of unwanted air turbulence. This means that even at low fan speeds, cooling is always optimised. The side panels can be removed at the touch of a button with ease as well, without the need for any screws. The four silicon passthroughs in be quiet’s! characteristic orange help with cable management and the rear of the motherboard provides plenty of space for stowing away unsightly cables. The power supply is installed down below and can be up to 288 mm long. The I/O-Panel is located on the roof and offers a large, elegant power switch as well as two audio jacks and two USB 3.0 ports and USB 2.0 ports. Technical Details: Dimensions: 532 x 240 x 514 mm (L x B x H) Material: Steel, ABS plastic, tempered glass Weight: ca. 10,5 kg Colour: Black / Orange Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX Total possible fans: 2x 120 / 140 mm (front) 1x 120 / 140 mm (rear) 3x 120 / 140 mm (roof) 1x 120 / 140 mm (PSU shroud) Pre-installed: 1x 140 mm (front; Pure Wings 2, max. 1000 RPM) 1x 140 mm (rear; Pure Wings 2, max. 1000 RPM) Radiator Mountings: 1x 360 / 280 / 240 / 140 / 120 mm (front) 1x 120 / 140 mm (rear) 1x 360 / 240 / 120 mm (roof) Filter: Front, bottom, side panel (removable) Drive Bays: 3x 3.5" (internal; tool free, 7 with additional accessories) 6x 2.5" (internal; tool free), 14 with additional accessories) PSU: 1x Standard ATX (optional) Expansion slots: 7 + 2 vertical I/O Panel: 2x USB 3.0 (internal connection) 2x USB 2.0 (internal connection) 1x Audio In/Out Insulation: Front, side panels, roof Dust filter: Front, bottom Max GPU Length: 449 mm Max GPU Length: 287 mm (with HDD cage) Max PSU Length: 288 mm Max CPU Cooler Height: 185 mm
