This Gigabit midspan PoE+ injector is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model. It supplies up to 30 Watts output to each port, so you can easily power and access up to four high-power PoE-compliant devices — such as IP cameras — using standard Ethernet cable. More power, with less cost and hassle This versatile midspan PoE+ injector is suited for almost all PoE device classes, including wireless access points, as well as IP phones and cameras. The high-power PoE+ injector offers 120W total power distribution and delivers full power — up to 30.8W — from each port. Now, you can easily scale and power your PoE+ devices across long distances, even in remote locations where a typical power outlet is unavailable. Plus, the cost-effective Power over Ethernet+ injector lets you connect your PoE-powered devices (PDs) to a non-PoE-capable switch, avoiding the expense and aggravation of upgrading your existing switch to a PoE-enabled model. Easy to set up in mixed environments This injector is the perfect solution for a variety of environments. It features a wall-mountable rugged metal casing, but is palm-sized making it perfect for desktop placement too. With plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow. Convenient, protected connections Not sure which class your PoE devices are? The Gigabit midspan PoE+ injector automatically detects the power requirements of your PoE PDs, and delivers the appropriate level of power without damaging your devices With integrated circuit protection between each port, your devices are also protected from power interference. Features Easily connect, power, and operate up to four Gigabit PoE-powered devices (PD) Delivers full power to each port — up to 30.8 watts (802.3at) or 15.4 watts (802.3af) to each connected device Flexible setup, with a desktop-sized, or wall-mountable metal housing Plug-and-play setup and operation Automatically detects the powered device to provide the appropriate level of power output Circuit protection prevents power interference between each port Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto-MDIX Specification Warranty 2 Years Hardware Industry Standards IEEE 802.3af PoE, IEEE 802.3at PoE+ IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T Ports 4 Performance Maximum Cable Length 100 m [328 ft] Maximum Data Transfer Rate 2 Gbps (Full-Duplex) MTBF 50,000 Hours Power Output 52V DC at 30.8W (PoE+) Connector(s) Connector Type(s) 8 - RJ-45 Female Special Notes / Requirements Note If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ4G will not inject power to the connected device(s) / Ethernet cable(s) Physical Characteristics Color Black Enclosure Type Steel Product Height 26 mm [1 in] Product Length 94 mm [3.7 in] Product Weight 204 g [7.2 oz] Product Width 70 mm [2.8 in] Indicators LED Indicators 1 - Power 4 - PoE In-Use Power Center Tip Polarity Positive Input Current 2-1 A Input Voltage 100 ~ 240 AC Output Current 2.31 A Output Voltage 52 DC Plug Type M Power Consumption 120 W Max Power Source AC Adapter Included