Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10GBase-SR, 10GBase-LRM, SFP+ and QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic and corrosive gases in poorly ventilated spaces and other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment and the performance headroom required to support LED and VCSEL laser light sources, and 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke and halogen emissions when the cable is exposed to extreme temperatures. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 3 (OM3) fibre supporting 2000 MHz.km EMB at 850 nm. • 10 Gigabit transfers up to 300 metres using 850 nm VCSEL source • Maximum Connector Loss: 0.50 dB • Typical Connector Loss: 0.30 dB • Typical Return Loss: -25 dB • Buffer Material: PVC • Buffer OD: 900 µm • Jacket Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1,000 cycles • Flex Resistance: 5,000 cycles • Attenuation at 1300 nm: 1.0 dB/km • Attenuation at 850 nm: 3.5 dB/km • Operating Temperature: -20°C to +70°C
